Assembly and Fitting Instructions

Your Scaregull comprises of a hub, a mounting pin, 2 arms, 2 sails and a deck mounting block.One sail is mounted on each arm. A brass sleeve goes over each spindle. A combined sleeve and spindle is inserted into each arm and is secured with a stainless washer and clip.(Picture A) The sails should be positioned as diagram B to ensure that the Scaregull.

The arms push into the hub and are secured with a stainless clip. The assembled Scaregull fits over the mounting pin and is secured with a stainless clip.The deck mounting block can be fitted to any level surface with the 2 screws supplied (use a 3mm drill).

The 150mm / 6” mounting pin needs to be vertical to ensure proper rotation. If your deck or surface is not horizontal use our variable angle bracket for correction.If additional clearance is needed then a 300mm / 12” mounting pin is available.


All Scaregull products have a 12 month warranty. Faulty parts returned to us within 12 months will be replaced on an exchange basis.

Correctly executed orders returned within 14 days in good condition will be entitled to a full refund.

Contact Us

[email protected]


By Post
Scaregull, 14 Pullens Field, Oxford, Oxfordshire, OX3 0BU, United Kingdom.